[pvrusb2] Problems with HVR-1900 (DVB)
Michael Krufky
mkrufky at linuxtv.org
Wed Feb 15 15:38:43 CST 2012
I posted a patch last week that should fix this problem. Please try this patch:
http://git.linuxtv.org/mkrufky/hauppauge.git/commitdiff_plain/7202e49582611ccd70e93db8b8f75c0811015444
From: Michael Krufky <mkrufky at linuxtv.org>
Date: Tue, 7 Feb 2012 16:28:33 +0000 (-0500)
Subject: pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
X-Git-Url: http://git.linuxtv.org
pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
The D1F5 revision of the WinTV HVR-1900 uses a tda18271c2 tuner
instead of a tda18271c1 tuner as used in revision D1E9. To
account for this, we must hardcode the frontend configuration
to use the same IF frequency configuration for both revisions
of the device.
6MHz DVB-T is unaffected by this issue, as the recommended
IF Frequency configuration for 6MHz DVB-T is the same on both
c1 and c2 revisions of the tda18271 tuner.
Signed-off-by: Michael Krufky <mkrufky at linuxtv.org>
Cc: Mike Isely <isely at pobox.com>
Cc: stable at kernel.org
---
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index c6da8f7..d8c8982 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -320,7 +320,17 @@ static struct tda829x_config tda829x_no_probe = {
.probe_tuner = TDA829X_DONT_PROBE,
};
+static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = {
+ .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
static struct tda18271_config hauppauge_tda18271_dvb_config = {
+ .std_map = &hauppauge_tda18271_dvbt_std_map,
.gate = TDA18271_GATE_ANALOG,
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
On Wed, Feb 15, 2012 at 3:48 PM, Ales Novy <ales.novy at gmail.com> wrote:
> Hi,
>
> I have HVR-1900 Model 73219 rev *D2F5* and I am not able to make it work.
> The analog part of the device work nicely but the DVB part does not. From
> the log (see bellow) everything looks good but DVB scan can not find any
> channel. I've tried several things:
>
> - Another dvb-fe-tda10048-1.0.fw firmware (than from linux-firmware-nonfree
> Ubuntu package). I manually extracted the firmware from Windows driver
> (Hcw73bda.sys) and it has different size (25098 bytes) so I had to modify
> tda10048.ko module to disable firmware size check. Does not help, no error
> in the log but no channel found.
> - Latest kernel 3.2.6-030206 but it also did not help.
>
> Any idea what to try?
>
> Thanks,
> ales
>
>
> Feb 15 20:15:32 velkej kernel: [ 86.312037] usb 2-1: new high-speed USB
> device number 2 using ehci_hcd
> Feb 15 20:15:32 velkej mtp-probe: checking bus 2, device 2:
> "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1"
> Feb 15 20:15:32 velkej mtp-probe: bus: 2, device: 2 was not an MTP device
> Feb 15 20:15:32 velkej kernel: [ 86.795508] Linux video capture
> interface: v2.00
> Feb 15 20:15:32 velkej kernel: [ 86.838739] pvrusb2: Hardware
> description: WinTV HVR-1900 Model 73xxx
> Feb 15 20:15:32 velkej kernel: [ 86.839154] usbcore: registered new
> interface driver pvrusb2
> Feb 15 20:15:32 velkej kernel: [ 86.839162] pvrusb2: V4L in-tree
> version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
> Feb 15 20:15:32 velkej kernel: [ 86.839168] pvrusb2: Debug mask is 31
> (0x1f)
> Feb 15 20:15:33 velkej kernel: [ 87.859917] pvrusb2: Device
> microcontroller firmware (re)loaded; it should now reset and reconnect.
> Feb 15 20:15:33 velkej kernel: [ 87.891799] usb 2-1: USB disconnect,
> device number 2
> Feb 15 20:15:33 velkej kernel: [ 87.891992] pvrusb2: Device being
> rendered inoperable
> Feb 15 20:15:35 velkej kernel: [ 89.644045] usb 2-1: new high-speed USB
> device number 3 using ehci_hcd
> Feb 15 20:15:35 velkej kernel: [ 89.786897] pvrusb2: Hardware
> description: WinTV HVR-1900 Model 73xxx
> Feb 15 20:15:35 velkej mtp-probe: checking bus 2, device 3:
> "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1"
> Feb 15 20:15:35 velkej kernel: [ 89.819137] pvrusb2: Binding
> ir_rx_z8f0811_haup to i2c address 0x71.
> Feb 15 20:15:35 velkej kernel: [ 89.819200] pvrusb2: Binding
> ir_tx_z8f0811_haup to i2c address 0x70.
> Feb 15 20:15:35 velkej kernel: [ 89.837401] cx25840 14-0044: cx25843-24
> found @ 0x88 (pvrusb2_a)
> Feb 15 20:15:35 velkej kernel: [ 89.847402] pvrusb2: Attached sub-driver
> cx25840
> Feb 15 20:15:35 velkej kernel: [ 89.874371] i2c-core: driver [tuner]
> using legacy suspend method
> Feb 15 20:15:35 velkej kernel: [ 89.874380] i2c-core: driver [tuner]
> using legacy resume method
> Feb 15 20:15:35 velkej kernel: [ 89.902503] tuner 14-0042: Tuner -1 found
> with type(s) Radio TV.
> Feb 15 20:15:35 velkej kernel: [ 89.902520] pvrusb2: Attached sub-driver
> tuner
> Feb 15 20:15:35 velkej mtp-probe: bus: 2, device: 3 was not an MTP device
> Feb 15 20:15:37 velkej kernel: [ 92.060899] cx25840 14-0044: loaded
> v4l-cx25840.fw firmware (16382 bytes)
> Feb 15 20:15:38 velkej kernel: [ 92.157107] tveeprom 14-00a2: Hauppauge
> model 73219, rev D2F5, serial# 7858972
> Feb 15 20:15:38 velkej kernel: [ 92.157116] tveeprom 14-00a2: MAC address
> is 00:0d:fe:77:eb:1c
> Feb 15 20:15:38 velkej kernel: [ 92.157123] tveeprom 14-00a2: tuner model
> is NXP 18271C2 (idx 155, type 54)
> Feb 15 20:15:38 velkej kernel: [ 92.157131] tveeprom 14-00a2: TV
> standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom
> 0xf4)
> Feb 15 20:15:38 velkej kernel: [ 92.157138] tveeprom 14-00a2: audio
> processor is CX25843 (idx 37)
> Feb 15 20:15:38 velkej kernel: [ 92.157144] tveeprom 14-00a2: decoder
> processor is CX25843 (idx 30)
> Feb 15 20:15:38 velkej kernel: [ 92.157150] tveeprom 14-00a2: has radio,
> has IR receiver, has IR transmitter
> Feb 15 20:15:38 velkej kernel: [ 92.157166] pvrusb2: Supported video
> standard(s) reported available in hardware:
> PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K
> Feb 15 20:15:38 velkej kernel: [ 92.157180] pvrusb2: Mapping standards
> mask=0x3ff00ff
> (PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC;ATSC-8VSB/16VSB)
> Feb 15 20:15:38 velkej kernel: [ 92.157187] pvrusb2: Setting up 20 unique
> standard(s)
> Feb 15 20:15:38 velkej kernel: [ 92.157194] pvrusb2: Set up standard
> idx=0 name=PAL-B/G
> Feb 15 20:15:38 velkej kernel: [ 92.157200] pvrusb2: Set up standard
> idx=1 name=PAL-D/K
> Feb 15 20:15:38 velkej kernel: [ 92.157206] pvrusb2: Set up standard
> idx=2 name=SECAM-B/G
> Feb 15 20:15:38 velkej kernel: [ 92.157212] pvrusb2: Set up standard
> idx=3 name=SECAM-D/K
> Feb 15 20:15:38 velkej kernel: [ 92.157218] pvrusb2: Set up standard
> idx=4 name=PAL-B
> Feb 15 20:15:38 velkej kernel: [ 92.157223] pvrusb2: Set up standard
> idx=5 name=PAL-B1
> Feb 15 20:15:38 velkej kernel: [ 92.157229] pvrusb2: Set up standard
> idx=6 name=PAL-G
> Feb 15 20:15:38 velkej kernel: [ 92.157234] pvrusb2: Set up standard
> idx=7 name=PAL-H
> Feb 15 20:15:38 velkej kernel: [ 92.157240] pvrusb2: Set up standard
> idx=8 name=PAL-I
> Feb 15 20:15:38 velkej kernel: [ 92.157245] pvrusb2: Set up standard
> idx=9 name=PAL-D
> Feb 15 20:15:38 velkej kernel: [ 92.157251] pvrusb2: Set up standard
> idx=10 name=PAL-D1
> Feb 15 20:15:38 velkej kernel: [ 92.157256] pvrusb2: Set up standard
> idx=11 name=PAL-K
> Feb 15 20:15:38 velkej kernel: [ 92.157262] pvrusb2: Set up standard
> idx=12 name=SECAM-B
> Feb 15 20:15:38 velkej kernel: [ 92.157267] pvrusb2: Set up standard
> idx=13 name=SECAM-D
> Feb 15 20:15:38 velkej kernel: [ 92.157273] pvrusb2: Set up standard
> idx=14 name=SECAM-G
> Feb 15 20:15:38 velkej kernel: [ 92.157278] pvrusb2: Set up standard
> idx=15 name=SECAM-H
> Feb 15 20:15:38 velkej kernel: [ 92.157284] pvrusb2: Set up standard
> idx=16 name=SECAM-K
> Feb 15 20:15:38 velkej kernel: [ 92.157290] pvrusb2: Set up standard
> idx=17 name=SECAM-K1
> Feb 15 20:15:38 velkej kernel: [ 92.157295] pvrusb2: Set up standard
> idx=18 name=SECAM-L
> Feb 15 20:15:38 velkej kernel: [ 92.157301] pvrusb2: Set up standard
> idx=19 name=SECAM-LC
> Feb 15 20:15:38 velkej kernel: [ 92.157306] pvrusb2: Initial video
> standard auto-selected to PAL-B/G
> Feb 15 20:15:38 velkej kernel: [ 92.157324] pvrusb2: Device
> initialization completed successfully.
> Feb 15 20:15:38 velkej kernel: [ 92.157521] pvrusb2: registered device
> video0 [mpeg]
> Feb 15 20:15:38 velkej kernel: [ 92.157532] DVB: registering new adapter
> (pvrusb2-dvb)
> Feb 15 20:15:40 velkej kernel: [ 94.361981] cx25840 14-0044: loaded
> v4l-cx25840.fw firmware (16382 bytes)
> Feb 15 20:15:40 velkej kernel: [ 94.476667] tda829x 14-0042: setting
> tuner address to 60
> Feb 15 20:15:40 velkej kernel: [ 94.516665] tda18271 14-0060: creating
> new instance
> Feb 15 20:15:40 velkej kernel: [ 94.552634] TDA18271HD/C2 detected @
> 14-0060
> Feb 15 20:15:41 velkej kernel: [ 95.608591] tda18271: performing RF
> tracking filter calibration
> Feb 15 20:15:55 velkej kernel: [ 109.648577] tda18271: RF tracking filter
> calibration complete
> Feb 15 20:15:55 velkej kernel: [ 109.696558] tda829x 14-0042: type set to
> tda8295+18271
> Feb 15 20:16:00 velkej kernel: [ 114.856558] cx25840 14-0044: 0x0000 is
> not a valid video input!
> Feb 15 20:16:00 velkej kernel: [ 114.898661] DVB: registering adapter 0
> frontend 0 (NXP TDA10048HN DVB-T)...
> Feb 15 20:16:00 velkej kernel: [ 114.900285] tda829x 14-0042: type set to
> tda8295
> Feb 15 20:16:00 velkej kernel: [ 114.936686] tda18271 14-0060: attaching
> existing instance
> Feb 15 20:18:41 velkej kernel: [ 276.007976] tda10048_firmware_upload:
> waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
> Feb 15 20:18:41 velkej kernel: [ 276.021079] tda10048_firmware_upload:
> firmware read 24878 bytes.
> Feb 15 20:18:41 velkej kernel: [ 276.021088] tda10048_firmware_upload:
> firmware uploading
> Feb 15 20:18:45 velkej kernel: [ 279.212668] tda10048_firmware_upload:
> firmware uploaded
> _______________________________________________
> pvrusb2 mailing list
> pvrusb2 at isely.net
> http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
More information about the pvrusb2
mailing list