[pvrusb2] Problems with HVR-1900 (DVB)

Wed Feb 15 14:48:29 CST 2012

Hi,

I have HVR-1900 Model 73219 rev *D2F5* and I am not able to make it work.
The analog part of the device work nicely but the DVB part does not. From
the log (see bellow) everything looks good but DVB scan can not find any
channel. I've tried several things:

- Another dvb-fe-tda10048-1.0.fw firmware (than from linux-firmware-nonfree
Ubuntu package). I manually extracted the firmware from Windows driver
(Hcw73bda.sys) and it has different size (25098 bytes) so I had to modify
tda10048.ko module to disable firmware size check. Does not help, no error
in the log but no channel found.
- Latest kernel 3.2.6-030206 but it also did not help.

Any idea what to try?

Thanks,
ales

Feb 15 20:15:32 velkej kernel: [   86.312037] usb 2-1: new high-speed USB
device number 2 using ehci_hcd
Feb 15 20:15:32 velkej mtp-probe: checking bus 2, device 2:
"/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1"
Feb 15 20:15:32 velkej mtp-probe: bus: 2, device: 2 was not an MTP device
Feb 15 20:15:32 velkej kernel: [   86.795508] Linux video capture
interface: v2.00
Feb 15 20:15:32 velkej kernel: [   86.838739] pvrusb2: Hardware
description: WinTV HVR-1900 Model 73xxx
Feb 15 20:15:32 velkej kernel: [   86.839154] usbcore: registered new
interface driver pvrusb2
Feb 15 20:15:32 velkej kernel: [   86.839162] pvrusb2: V4L in-tree
version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
Feb 15 20:15:32 velkej kernel: [   86.839168] pvrusb2: Debug mask is 31
(0x1f)
Feb 15 20:15:33 velkej kernel: [   87.859917] pvrusb2: Device
microcontroller firmware (re)loaded; it should now reset and reconnect.
Feb 15 20:15:33 velkej kernel: [   87.891799] usb 2-1: USB disconnect,
device number 2
Feb 15 20:15:33 velkej kernel: [   87.891992] pvrusb2: Device being
rendered inoperable
Feb 15 20:15:35 velkej kernel: [   89.644045] usb 2-1: new high-speed USB
device number 3 using ehci_hcd
Feb 15 20:15:35 velkej kernel: [   89.786897] pvrusb2: Hardware
description: WinTV HVR-1900 Model 73xxx
Feb 15 20:15:35 velkej mtp-probe: checking bus 2, device 3:
"/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1"
Feb 15 20:15:35 velkej kernel: [   89.819137] pvrusb2: Binding
ir_rx_z8f0811_haup to i2c address 0x71.
Feb 15 20:15:35 velkej kernel: [   89.819200] pvrusb2: Binding
ir_tx_z8f0811_haup to i2c address 0x70.
Feb 15 20:15:35 velkej kernel: [   89.837401] cx25840 14-0044: cx25843-24
found @ 0x88 (pvrusb2_a)
Feb 15 20:15:35 velkej kernel: [   89.847402] pvrusb2: Attached sub-driver
cx25840
Feb 15 20:15:35 velkej kernel: [   89.874371] i2c-core: driver [tuner]
using legacy suspend method
Feb 15 20:15:35 velkej kernel: [   89.874380] i2c-core: driver [tuner]
using legacy resume method
Feb 15 20:15:35 velkej kernel: [   89.902503] tuner 14-0042: Tuner -1 found
with type(s) Radio TV.
Feb 15 20:15:35 velkej kernel: [   89.902520] pvrusb2: Attached sub-driver
tuner
Feb 15 20:15:35 velkej mtp-probe: bus: 2, device: 3 was not an MTP device
Feb 15 20:15:37 velkej kernel: [   92.060899] cx25840 14-0044: loaded
v4l-cx25840.fw firmware (16382 bytes)
Feb 15 20:15:38 velkej kernel: [   92.157107] tveeprom 14-00a2: Hauppauge
model 73219, rev D2F5, serial# 7858972
Feb 15 20:15:38 velkej kernel: [   92.157116] tveeprom 14-00a2: MAC address
is 00:0d:fe:77:eb:1c
Feb 15 20:15:38 velkej kernel: [   92.157123] tveeprom 14-00a2: tuner model
is NXP 18271C2 (idx 155, type 54)
Feb 15 20:15:38 velkej kernel: [   92.157131] tveeprom 14-00a2: TV
standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom
0xf4)
Feb 15 20:15:38 velkej kernel: [   92.157138] tveeprom 14-00a2: audio
processor is CX25843 (idx 37)
Feb 15 20:15:38 velkej kernel: [   92.157144] tveeprom 14-00a2: decoder
processor is CX25843 (idx 30)
Feb 15 20:15:38 velkej kernel: [   92.157150] tveeprom 14-00a2: has radio,
has IR receiver, has IR transmitter
Feb 15 20:15:38 velkej kernel: [   92.157166] pvrusb2: Supported video
standard(s) reported available in hardware:
PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K
Feb 15 20:15:38 velkej kernel: [   92.157180] pvrusb2: Mapping standards
mask=0x3ff00ff
(PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC;ATSC-8VSB/16VSB)
Feb 15 20:15:38 velkej kernel: [   92.157187] pvrusb2: Setting up 20 unique
standard(s)
Feb 15 20:15:38 velkej kernel: [   92.157194] pvrusb2: Set up standard
idx=0 name=PAL-B/G
Feb 15 20:15:38 velkej kernel: [   92.157200] pvrusb2: Set up standard
idx=1 name=PAL-D/K
Feb 15 20:15:38 velkej kernel: [   92.157206] pvrusb2: Set up standard
idx=2 name=SECAM-B/G
Feb 15 20:15:38 velkej kernel: [   92.157212] pvrusb2: Set up standard
idx=3 name=SECAM-D/K
Feb 15 20:15:38 velkej kernel: [   92.157218] pvrusb2: Set up standard
idx=4 name=PAL-B
Feb 15 20:15:38 velkej kernel: [   92.157223] pvrusb2: Set up standard
idx=5 name=PAL-B1
Feb 15 20:15:38 velkej kernel: [   92.157229] pvrusb2: Set up standard
idx=6 name=PAL-G
Feb 15 20:15:38 velkej kernel: [   92.157234] pvrusb2: Set up standard
idx=7 name=PAL-H
Feb 15 20:15:38 velkej kernel: [   92.157240] pvrusb2: Set up standard
idx=8 name=PAL-I
Feb 15 20:15:38 velkej kernel: [   92.157245] pvrusb2: Set up standard
idx=9 name=PAL-D
Feb 15 20:15:38 velkej kernel: [   92.157251] pvrusb2: Set up standard
idx=10 name=PAL-D1
Feb 15 20:15:38 velkej kernel: [   92.157256] pvrusb2: Set up standard
idx=11 name=PAL-K
Feb 15 20:15:38 velkej kernel: [   92.157262] pvrusb2: Set up standard
idx=12 name=SECAM-B
Feb 15 20:15:38 velkej kernel: [   92.157267] pvrusb2: Set up standard
idx=13 name=SECAM-D
Feb 15 20:15:38 velkej kernel: [   92.157273] pvrusb2: Set up standard
idx=14 name=SECAM-G
Feb 15 20:15:38 velkej kernel: [   92.157278] pvrusb2: Set up standard
idx=15 name=SECAM-H
Feb 15 20:15:38 velkej kernel: [   92.157284] pvrusb2: Set up standard
idx=16 name=SECAM-K
Feb 15 20:15:38 velkej kernel: [   92.157290] pvrusb2: Set up standard
idx=17 name=SECAM-K1
Feb 15 20:15:38 velkej kernel: [   92.157295] pvrusb2: Set up standard
idx=18 name=SECAM-L
Feb 15 20:15:38 velkej kernel: [   92.157301] pvrusb2: Set up standard
idx=19 name=SECAM-LC
Feb 15 20:15:38 velkej kernel: [   92.157306] pvrusb2: Initial video
standard auto-selected to PAL-B/G
Feb 15 20:15:38 velkej kernel: [   92.157324] pvrusb2: Device
initialization completed successfully.
Feb 15 20:15:38 velkej kernel: [   92.157521] pvrusb2: registered device
video0 [mpeg]
Feb 15 20:15:38 velkej kernel: [   92.157532] DVB: registering new adapter
(pvrusb2-dvb)
Feb 15 20:15:40 velkej kernel: [   94.361981] cx25840 14-0044: loaded
v4l-cx25840.fw firmware (16382 bytes)
Feb 15 20:15:40 velkej kernel: [   94.476667] tda829x 14-0042: setting
tuner address to 60
Feb 15 20:15:40 velkej kernel: [   94.516665] tda18271 14-0060: creating
new instance
Feb 15 20:15:40 velkej kernel: [   94.552634] TDA18271HD/C2 detected @
14-0060
Feb 15 20:15:41 velkej kernel: [   95.608591] tda18271: performing RF
tracking filter calibration
Feb 15 20:15:55 velkej kernel: [  109.648577] tda18271: RF tracking filter
calibration complete
Feb 15 20:15:55 velkej kernel: [  109.696558] tda829x 14-0042: type set to
tda8295+18271
Feb 15 20:16:00 velkej kernel: [  114.856558] cx25840 14-0044: 0x0000 is
not a valid video input!
Feb 15 20:16:00 velkej kernel: [  114.898661] DVB: registering adapter 0
frontend 0 (NXP TDA10048HN DVB-T)...
Feb 15 20:16:00 velkej kernel: [  114.900285] tda829x 14-0042: type set to
tda8295
Feb 15 20:16:00 velkej kernel: [  114.936686] tda18271 14-0060: attaching
existing instance
Feb 15 20:18:41 velkej kernel: [  276.007976] tda10048_firmware_upload:
waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
Feb 15 20:18:41 velkej kernel: [  276.021079] tda10048_firmware_upload:
firmware read 24878 bytes.
Feb 15 20:18:41 velkej kernel: [  276.021088] tda10048_firmware_upload:
firmware uploading
Feb 15 20:18:45 velkej kernel: [  279.212668] tda10048_firmware_upload:
firmware uploaded