[pvrusb2] My HVR-1950 IR Remote does work
Roger
rogerx at sdf.lonestar.org
Tue Jun 2 21:34:13 CDT 2009
On Tue, 2009-06-02 at 20:00 -0500, Mike Isely wrote:
> Then again if Roger is able to make this at least partially work then
> maybe everything I've said above is unneeded.
The post just prior to this one, I posted a quick IRW output of just
pushing two buttons.
You might have missed the post Mike or you're just catching-up.
Irw reports using the configuration for "Hauppauge_350"
I just earlier today tested all the buttons on my hvr-1950 remote and
conclude all the buttons do appear to work just fine (for Gentoo's lirc
build).
# uname -a
Linux localhost2.local 2.6.29-gentoo-r4Y #9 SMP PREEMPT Tue Jun 2
03:38:16 AKDT 2009 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux
=app-misc/lirc-0.8.4a
(The above versions have all been posted to this list already.)
The only over site I can think of is, Gentoo packages the lirc package
and applies patches. Along with this kernel also, it does have some
patches too, but most relevant patches for this issue are going to be
the lirc ones.
Viewing my distro's patch files for lirc does show quite a few.
I think, if people *are* using the same lirc version as myself, and
their older pvrusb2 device does work, they should try grepping the
Gentoo lirc patch files or applying them manually as one debug method.
Really, I think users should file a bug report with their distro at this
point if it isn't something with their configuration.
One thing I just noticed, my /etc/lircd.conf file doesn't seem to be
provided by my distro's Lirc ebuild. It provides several Hauppauge
remotes, for which the Hauppauge_350 is used for the HVR-1950 remote.
(I'm wondering if I got this config file from Mike's site at one time?)
See attachment! (I'll also send the attch to ric incase this gets
stripped.)
(One other neat note, /dev/lirc0 & /dev/lirc1 exists and it would seem
lirc picks-up the IR signals even with the /dev/lirc0 unplugged -- even
though /etc/conf.d/lirc is defined to use /dev/lirc0. However, I'm
still initially going through all these configurations a little at a
time.)
> >
> > P.S. Silly question, but just to check - the HVR-1950 is the only IR sensing
> > device on your system, right? Is there a chance that lirc is picking up the
> > remote's signals on some other input?
>
> Roger has another (29xxx I think) device nearby but he did tell me that
> he disconnected it once just to prove that the signals were not coming
> from it.
>
> -Mike
One of my earlier posts likely do declare I already removed the pvrusb2
device prior to testing. However, as I mentioned within irssi
initially, I totally forgot about the older pvrusb2 2900 unit!
--- snip ----
Sat 12:55pm
> P.S. Silly question, but just to check - the HVR-1950 is the only IR
> sensing device on your system, right? Is there a chance that lirc is
> picking up the remote's signals on some other input?
This isn't as stupid sounding question as it may sound. It's only
stupid if you're the one playing with remotes in front of two devices
without even thinking the other older pvrusb2 device is picking up the
IR signals.
--- snip ----
--
Roger
http://rogerx.freeshell.org
-------------- next part --------------
#
# this config file was automatically generated
# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
#
# contributed by Jens Leuschner <leuschner at gmx.net>
#
# brand: Hauppauge
# model:
# supported devices: WinTV primo; WinTV pci; WinTV radio
#
# This config file will work with both homebrew receivers and
# original Hauppauge TV cards !!!
#
begin remote
name Hauppauge
bits 13
flags SHIFT_ENC
eps 30
aeps 100
one 950 830
zero 950 830
plead 960
gap 89584
repeat_bit 2
begin codes
TV 0x000000000000100F
RADIO 0x000000000000100C
FULL_SCREEN 0x000000000000102E
CH+ 0x0000000000001020
CH- 0x0000000000001021
VOL- 0x0000000000001011
VOL+ 0x0000000000001010
MUTE 0x000000000000100D
SOURCE 0x0000000000001022
1 0x0000000000001001
2 0x0000000000001002
3 0x0000000000001003
4 0x0000000000001004
5 0x0000000000001005
6 0x0000000000001006
7 0x0000000000001007
8 0x0000000000001008
9 0x0000000000001009
0 0x0000000000001000
RESERVED 0x000000000000101E
MINIMIZE 0x0000000000001026
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
#
# contributed by
#
# brand: Hauppauge
# model no. of remote control:
# devices being controlled by this remote: PVR 2/350
#
begin remote
name hauppauge_pvr
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Power 0x00000000000017FD
Go 0x00000000000017FB
1 0x00000000000017C1
2 0x00000000000017C2
3 0x00000000000017C3
4 0x00000000000017C4
5 0x00000000000017C5
6 0x00000000000017C6
7 0x00000000000017C7
8 0x00000000000017C8
9 0x00000000000017C9
Back/Exit 0x00000000000017DF
0 0x00000000000017C0
Menu 0x00000000000017CD
Red 0x00000000000017CB
Green 0x00000000000017EE
Yellow 0x00000000000017F8
Blue 0x00000000000017E9
Ch+ 0x00000000000017E0
Ch- 0x00000000000017E1
Vol- 0x00000000000017D1
Vol+ 0x00000000000017D0
Ok 0x00000000000017E5
Mute 0x00000000000017CF
Blank 0x00000000000017CC
Full 0x00000000000017FC
Rewind 0x00000000000017F2
Play 0x00000000000017F5
Forward 0x00000000000017F4
Record 0x00000000000017F7
Stop 0x00000000000017F6
Pause 0x00000000000017F0
Replay 0x00000000000017E4
Skip 0x00000000000017DE
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
#
# contributed by
#
# brand: Hauppauge 350
# Created: G.J. Werler (The Netherlands)
# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
# Date: 2004/11/28
# model no. of remote control: Hauppauge A415-HPG
# devices being controlled by this remote: PVR-350
#
begin remote
name Hauppauge_350
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Go 0x00000000000017BB
Power 0x00000000000017BD
TV 0x000000000000179C
Videos 0x0000000000001798
Music 0x0000000000001799
Pictures 0x000000000000179A
Guide 0x000000000000179B
Radio 0x000000000000178C
Up 0x0000000000001794
Left 0x0000000000001796
Right 0x0000000000001797
Down 0x0000000000001795
OK 0x00000000000017A5
Back/Exit 0x000000000000179F
Menu/i 0x000000000000178D
Vol+ 0x0000000000001790
Vol- 0x0000000000001791
Prev.Ch 0x0000000000001792
Mute 0x000000000000178F
Ch+ 0x00000000000017A0
Ch- 0x00000000000017A1
Record 0x00000000000017B7
Stop 0x00000000000017B6
Rewind 0x00000000000017B2
Play 0x00000000000017B5
Forward 0x00000000000017B4
Replay/SkipBackward 0x00000000000017A4
Pause 0x00000000000017B0
SkipForward 0x000000000000179E
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Asterix 0x000000000000178A
0 0x0000000000001780
# 0x000000000000178E
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005
#
# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
# members of linux user group Vorarlberg www.lugv.at
#
# for ir remote controler from Hauppauge WinTV Nexus-S
# most of the keys are supported
#
# brand: Hauppauge
# model no. of remote control: WinTV Nexus-S
# devices being controlled by this remote:
#
begin remote
name Hauppauge_WinTV_Nexus-S
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 944 828
zero 944 828
plead 980
gap 113932
min_repeat 1
toggle_bit 2
begin codes
Up 0x0000000000001794
Down 0x0000000000001795
Left 0x0000000000001796
Right 0x0000000000001797
Power 0x00000000000017BD
Ok 0x00000000000017A5
Menu 0x000000000000178D
Back 0x000000000000179F
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
0 0x0000000000001780
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Play 0x00000000000017B5
Pause 0x00000000000017B0
Stop 0x00000000000017B6
Record 0x00000000000017B7
FastFwd 0x00000000000017B4
FastRwd 0x00000000000017B2
Channel+ 0x00000000000017A0
Channel- 0x00000000000017A1
Volume+ 0x0000000000001790
Volume- 0x0000000000001791
Mute 0x000000000000178F
Timers 0x000000000000178A
Recordings 0x000000000000178E
Back 0x000000000000179F
Record 0x00000000000017B7
Pause 0x00000000000017B0
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.8.3pre1(default) on Sat Jun 21 12:36:46 2008
#
# contributed by Matthew Wright
#
# brand: Hauppauge (HRV-1600 RT Remote)
# model no. of remote control: A415-HPG-A
# devices being controlled by this remote:
#
begin remote
name Hauppauge
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 919 852
zero 919 852
plead 930
gap 112908
toggle_bit_mask 0x800
begin codes
power 0x17BD
go 0x17BB
tv 0x179C
videos 0x1798
music 0x1799
pictures 0x179A
guide 0x179B
radio 0x178C
exit 0x179F
menu 0x178D
prevch 0x1792
mute 0x178F
up 0x1794
down 0x1795
left 0x1796
right 0x1797
ok 0x17A5
volup 0x1790
voldown 0x1791
chup 0x17A0
chdown 0x17A1
record 0x17B7
stop 0x17B6
rewind 0x17B2
fastfwd 0x17B4
play 0x17B5
replay 0x17A4
skip 0x179E
pause 0x17B0
1 0x1781
2 0x1782
3 0x1783
4 0x1784
5 0x1785
6 0x1786
7 0x1787
8 0x1788
9 0x1789
* 0x178A
0 0x1780
# 0x178E
red 0x178B
green 0x17AE
yellow 0x17B8
blue 0x17A9
sub/cc 0x178E
text 0x178A
home 0x17BB
end codes
end remote
More information about the pvrusb2
mailing list