[pvrusb2] Some install guidance on WinTV PVR2 USB

Lorne Shantz lorne_shantz at yahoo.com
Wed Mar 20 15:57:06 CDT 2013 

Give it a try, I installed it on my desktop because I had no idea at all what it was, and it fired right up. The only issue was I have two monitors and it was huge, and kind of borked my video driver, but I think it was because of dual monitors. I think it is all inclusive. 

--- On Wed, 3/20/13, Matt Farmer <notjimcarrey at gmail.com> wrote:

> From: Matt Farmer <notjimcarrey at gmail.com>
> Subject: Re: [pvrusb2] Some install guidance on WinTV PVR2 USB
> To: "Communications nexus for pvrusb2 driver" <pvrusb2 at isely.net>
> Date: Wednesday, March 20, 2013, 11:20 AM
> XBMC still needs a backend, or so I
> thought
> 
> 
> On Wed, Mar 20, 2013 at 9:57 PM, Lorne Shantz <lorne_shantz at yahoo.com>wrote:
> 
> > The only advice I could give, is have you tried XBMC? I
> spent so many
> > hours on MythTV that I hate to think of it. Finally got
> it working and
> > never liked it. Just always a fight it seemed. The XBMC
> while I've not
> > spent any time on it to speak of, looks like a much
> easier setup.
> >
> > --- On Wed, 3/20/13, Matt Farmer <notjimcarrey at gmail.com>
> wrote:
> >
> > > From: Matt Farmer <notjimcarrey at gmail.com>
> > > Subject: Re: [pvrusb2] Some install guidance on
> WinTV PVR2 USB
> > > To: "Communications nexus for pvrusb2 driver"
> <pvrusb2 at isely.net>
> > > Date: Wednesday, March 20, 2013, 9:17 AM
> > > Speaking of the HVR-1950, how do I
> > > get MythTV to search for channels using
> > > this card? I've had issues getting most software
> to tune
> > > analog channels
> > > with it since it uses an MPEG2 decoder.
> > >
> > >
> > > On Wed, Mar 20, 2013 at 7:00 AM, Mike Isely <isely at isely.net>
> > > wrote:
> > >
> > > >
> > > > Lorne:
> > > >
> > > > These days the in-kernel pvrusb2 driver
> should work
> > > great without any
> > > > special setup beyond perhaps ensuring you
> have the
> > > firmware files
> > > > installed somewhere visible to udev. 
> Kernel
> > > 3.4.33 is reasonably new
> > > > and should "just work".  I imagine most
> > > distribution kernels probably
> > > > compile this driver for you, either into the
> kernel
> > > package itself or
> > > > maybe as a "media" package add-on.  If
> you
> > > searched /lib/modules
> > > > recursively, you should be able to find
> "pvrusb2.ko" in
> > > there.
> > > >
> > > > Things I would check for:
> > > >
> > > > 1. Ensure the pvrusb2 device's power brick is
> plugged
> > > in and the unit is
> > > > actually getting power.  If that isn't
> happening,
> > > then *nothing* else
> > > > will work.
> > > >
> > > > 2. Even if the firmware files are not
> installed, the
> > > pvrusb2 driver
> > > > should still attempt to attach to the
> hardware and you
> > > should see
> > > > corresponding messages in the kernel log
> (i.e. dmesg) -
> > > leading up to
> > > > the point where it gives up for lack of
> available
> > > firmware.  So if
> > > > you're not seeing any messages, then the lack
> of
> > > firmware is likely not
> > > > the issue.
> > > >
> > > > 3. Even if the pvrusb2 driver itself were
> completely
> > > borked or otherwise
> > > > missing, you should still be able to see the
> hardware
> > > show up to the
> > > > kernel via either running the "usbview" tool
> or just
> > > "cat
> > > > /proc/bus/usb/devices".  If you can't
> see anything
> > > there that suggests
> > > > the presence of the pvrusb2 hardware, then
> the driver
> > > situation won't
> > > > matter at all.  (This would suggest the
> device is
> > > not getting power or
> > > > there is a communication issue between the PC
> and the
> > > device.)
> > > >
> > > > If there is a suspicion about, say, a bad USB
> hub or
> > > USB cable, then I
> > > > would (obviously) try swapping around those
> parts.
> > > >
> > > > If you have another PC (or laptop nearby),
> you can also
> > > try plugging the
> > > > device in there - if only to see if you get a
> reaction
> > > from the
> > > > operating system, e.g. if it were Windows you
> might be
> > > prompted to
> > > > install drivers or if it were Linux you could
> notice
> > > the appearance of
> > > > the hardware in your dmesg output.  Such
> a thing
> > > would at least tell you
> > > > that the hardware is not dead.  If none
> of that
> > > produces a reaction,
> > > > then I'd probably re-examine step #1 above a
> lot more
> > > closely.  If you
> > > > have a voltmeter nearby then for example I'd
> check that
> > > you're getting 6
> > > > volts at the DC plug end...
> > > >
> > > > I have one laptop here that - with particular
> (older)
> > > kernel versions -
> > > > has trouble recognizing the presence of the
> old (first
> > > generation) 29xxx
> > > > model series.  It's a really bizarre
> thing,
> > > requiring a specific
> > > > combination of computer, kernel version, and
> a 29xxx
> > > model.  I've never
> > > > been able to track down why this is, except
> to suspect
> > > that the FX2 boot
> > > > firmware in that model series has a quirk
> that is
> > > upsetting the USB
> > > > stack for a particular type of USB host
> controller
> > > combined with a
> > > > particular kernel version.
> > > >
> > > > Hope that helps...
> > > >
> > > >   -Mike
> > > >
> > > >
> > > > On Mon, 18 Mar 2013, Lorne Shantz wrote:
> > > >
> > > > > I had a it running a few years back
> until a system
> > > rebuild. I gave up
> > > > because I couldn't remember how I had it
> working and
> > > just went with a PCI
> > > > card. Well now I'm using a newer MB, that
> does not have
> > > any PCI slots. I
> > > > really need to get this running.
> > > > >
> > > > >
> > > > > Kernel image:
> /boot/vmlinuz-3.4.33-2.24-desktop
> > > > >
> > > > > Initrd image:
> /boot/initrd-3.4.33-2.24-desktop
> > > > >
> > > > > Root device: /dev/sdb1 (mounted on / as
> ext4)
> > > > >
> > > > > Resume device:
> > > >
> > >
> /dev/disk/by-id/ata-WDC_WD20EADS-32S2B0_WD-WCAVY3847719-part3
> > > > >
> > > > > (/dev/sdb3)
> > > > >
> > > > > modprobe: Module hid_generic not found.
> > > > >
> > > > > WARNING: no dependencies for kernel
> module
> > > 'hid-generic' found.
> > > > >
> > > > > Kernel Modules: thermal_sys thermal
> processor fan
> > > pata_marvell ata_piix
> > > > >
> > > > > ata_generic scsi_transport_sas libsas
> isci scsi_dh
> > > scsi_dh_hp_sw
> > > > scsi_dh_rdac
> > > > >
> > > > > scsi_dh_emc scsi_dh_alua xhci-hcd
> hid-logitech-dj
> > > > >
> > > > > Firmware: isci/isci_firmware.bin
> > > isci/isci_firmware.bin
> > > > >
> > > > > Features: acpi plymouth block usb
> resume.userspace
> > > resume.kernel
> > > > >
> > > > >
> > > > >
> > > > > The pvrusb2.ko file is in
> > > >
> > >
> >
> /lib/modules/3.4.33-2.24-desktop/kernel/drivers/media/video/pvrusb2/pvrusb2.ko
> > > > >
> > > > >
> > > > > I have compiled the kernel as I believe
> you have
> > > instructed.
> > > > >
> > > > >
> > > > > dmesg shows:
> > > > >
> > > > > [ 315.904957] Linux video capture
> interface:
> > > v2.00
> > > > >
> > > > > [ 315.955716] usbcore: registered new
> interface
> > > driver em28xx
> > > > >
> > > > >
> > > > > No video0 or video1.
> > > > >
> > > > >
> > > > > I'm not sure that the above is even the
> WinTV PVR2
> > > USB device. I guess I
> > > > could remove it and reboot, however, if
> memory serves,
> > > > >
> > > > > back a couple of years ago I did have it
> running,
> > > it would pop up a
> > > > message that was more clear when it was
> detected.
> > > > >
> > > > >
> > > > > Later.... I removed the device and
> rebooted.
> > > Nothing indicating video. I
> > > > plugged it back in, and still nothing.
> > > > >
> > > > >
> > > > > The only thing I can figure, is somehow
> the driver
> > > is not compiled
> > > > correctly.
> > > > >
> _______________________________________________
> > > > > pvrusb2 mailing list
> > > > > pvrusb2 at isely.net
> > > > > http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
> > > > >
> > > >
> > > > --
> > > >
> > > > Mike Isely
> > > > isely @ isely (dot) net
> > > > PGP: 03 54 43 4D 75 E5 CC 92 71 16 01 E2 B5
> F5 C1 E8
> > > >
> _______________________________________________
> > > > pvrusb2 mailing list
> > > > pvrusb2 at isely.net
> > > > http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
> > > >
> > > _______________________________________________
> > > pvrusb2 mailing list
> > > pvrusb2 at isely.net
> > > http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
> > >
> > _______________________________________________
> > pvrusb2 mailing list
> > pvrusb2 at isely.net
> > http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
> >
> _______________________________________________
> pvrusb2 mailing list
> pvrusb2 at isely.net
> http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
>

More information about the pvrusb2 mailing list