[pvrusb2] problem with a hvr-1900
Tomas Hylander
tomas.hylander at gmail.com
Fri Sep 3 02:37:15 CDT 2010
Hi
Have been trying to get my hvr-1900 to work but it looks like I cant get it
to change channel.
Various logs..
----------------------------------------------------------------------------
tomas at MythCube:~$ lsusb
Bus 004 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard
Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2040:7300 Hauppauge
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-----------------------------------------------------------------------------------
tomas at MythCube:~$ lsmod | grep pvrusb2
pvrusb2 130786 0
dvb_core 86142 1 pvrusb2
cx2341x 12469 1 pvrusb2
v4l2_common 15431 4 tuner,cx25840,pvrusb2,cx2341x
videodev 34361 4 tuner,cx25840,pvrusb2,v4l2_common
v4l1_compat 13251 2 pvrusb2,videodev
tveeprom 11102 1 pvrusb2
------------------------------------------------------------------------------------
[ 18.650838] Linux video capture interface: v2.00
[ 18.844460] usbcore: registered new interface driver pvrusb2
[ 18.844468] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2
Encoder/Tuner
[ 18.844475] pvrusb2: Debug mask is 31 (0x1f)
[ 18.845060] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
[ 18.845073] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 20
(level, low) -> IRQ 20
[ 18.846044] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
[ 18.846053] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 23
(level, low) -> IRQ 23
[ 18.846069] nvidia 0000:03:00.0: setting latency timer to 64
[ 18.846080] vgaarb: device changed decodes:
PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.846639] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu
Apr 22 09:18:20 PDT 2010
[ 18.971206] Console: switching to colour frame buffer device 80x30
[ 18.980361] CPU0 attaching sched-domain:
[ 18.980370] domain 0: span 0,2 level SIBLING
[ 18.980377] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[ 18.980390] domain 1: span 0,2 level MC
[ 18.980395] groups: 0,2 (cpu_power = 1178)
[ 18.980405] domain 2: span 0-3 level CPU
[ 18.980410] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 18.980426] CPU1 attaching sched-domain:
[ 18.980431] domain 0: span 1,3 level SIBLING
[ 18.980436] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 18.980448] domain 1: span 1,3 level MC
[ 18.980453] groups: 1,3 (cpu_power = 1178)
[ 18.980462] domain 2: span 0-3 level CPU
[ 18.980467] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 18.980481] CPU2 attaching sched-domain:
[ 18.980486] domain 0: span 0,2 level SIBLING
[ 18.980491] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 18.980503] domain 1: span 0,2 level MC
[ 18.980508] groups: 0,2 (cpu_power = 1178)
[ 18.980517] domain 2: span 0-3 level CPU
[ 18.980523] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 18.980536] CPU3 attaching sched-domain:
[ 18.980541] domain 0: span 1,3 level SIBLING
[ 18.980546] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 18.980558] domain 1: span 1,3 level MC
[ 18.980563] groups: 1,3 (cpu_power = 1178)
[ 18.980572] domain 2: span 0-3 level CPU
[ 18.980577] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 19.138694] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 19.138836] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 19.140242] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 19.140261] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22
(level, low) -> IRQ 22
[ 19.140273] hda_intel: Disable MSI for Nvidia chipset
[ 19.140355] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 19.848661] usb 1-2: firmware: requesting v4l-pvrusb2-73xxx-01.fw
[ 19.882637] pvrusb2: Device microcontroller firmware (re)loaded; it
should now reset and reconnect.
[ 19.914445] usb 1-2: USB disconnect, address 2
[ 19.914690] pvrusb2: Device being rendered inoperable
[ 19.993060] hda_codec: ALC887: BIOS auto-probing.
[ 20.241816] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:08.0/input/input5
[ 20.932812] r8169: WARNING! Changing of MTU on this NIC may lead to frame
reception errors!
[ 21.672073] usb 1-2: new high speed USB device using ehci_hcd and address
3
[ 21.818397] usb 1-2: configuration #1 chosen from 1 choice
[ 21.861633] cx25840 4-0044: cx25843-24 found @ 0x88 (pvrusb2_a)
[ 21.862505] pvrusb2: Attached sub-driver cx25840
[ 21.894042] tuner 4-0042: chip found @ 0x84 (pvrusb2_a)
[ 21.912376] tda9887 4-0042: creating new instance
[ 21.912387] tda9887 4-0042: tda988[5/6/7] found
[ 21.913150] pvrusb2: Attached sub-driver tuner
[ 21.926504] cx25840 4-0044: firmware: requesting v4l-cx25840.fw
[ 24.454742] cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 24.554004] tveeprom 4-00a2: Hauppauge model 73219, rev D2F5, serial#
7274879
[ 24.554014] tveeprom 4-00a2: MAC address is 00-0D-FE-6F-01-7F
[ 24.554021] tveeprom 4-00a2: tuner model is NXP 18271C2 (idx 155, type
54)
[ 24.554029] tveeprom 4-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L')
PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 24.554037] tveeprom 4-00a2: audio processor is CX25843 (idx 37)
[ 24.554042] tveeprom 4-00a2: decoder processor is CX25843 (idx 30)
[ 24.554048] tveeprom 4-00a2: has radio, has IR receiver, has IR
transmitter
[ 24.554066] pvrusb2: Supported video standard(s) reported available in
hardware: PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K
[ 24.554080] pvrusb2: Mapping standards mask=0x3ff00ff
(PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC;ATSC-8VSB/16VSB)
[ 24.554088] pvrusb2: Setting up 20 unique standard(s)
[ 24.554097] pvrusb2: Set up standard idx=0 name=PAL-B/G
[ 24.554103] pvrusb2: Set up standard idx=1 name=PAL-D/K
[ 24.554109] pvrusb2: Set up standard idx=2 name=SECAM-B/G
[ 24.554115] pvrusb2: Set up standard idx=3 name=SECAM-D/K
[ 24.554121] pvrusb2: Set up standard idx=4 name=PAL-B
[ 24.554126] pvrusb2: Set up standard idx=5 name=PAL-B1
[ 24.554132] pvrusb2: Set up standard idx=6 name=PAL-G
[ 24.554138] pvrusb2: Set up standard idx=7 name=PAL-H
[ 24.554143] pvrusb2: Set up standard idx=8 name=PAL-I
[ 24.554149] pvrusb2: Set up standard idx=9 name=PAL-D
[ 24.554155] pvrusb2: Set up standard idx=10 name=PAL-D1
[ 24.554160] pvrusb2: Set up standard idx=11 name=PAL-K
[ 24.554166] pvrusb2: Set up standard idx=12 name=SECAM-B
[ 24.554172] pvrusb2: Set up standard idx=13 name=SECAM-D
[ 24.554178] pvrusb2: Set up standard idx=14 name=SECAM-G
[ 24.554184] pvrusb2: Set up standard idx=15 name=SECAM-H
[ 24.554190] pvrusb2: Set up standard idx=16 name=SECAM-K
[ 24.554195] pvrusb2: Set up standard idx=17 name=SECAM-K1
[ 24.554201] pvrusb2: Set up standard idx=18 name=SECAM-L
[ 24.554207] pvrusb2: Set up standard idx=19 name=SECAM-LC
[ 24.554214] pvrusb2: Initial video standard auto-selected to PAL-B/G
[ 24.554236] pvrusb2: Device initialization completed successfully.
[ 24.554409] pvrusb2: registered device video0 [mpeg]
[ 24.554418] DVB: registering new adapter (pvrusb2-dvb)
[ 24.620865] cx25840 4-0044: firmware: requesting v4l-cx25840.fw
[ 26.944036] eth0: no IPv6 routers present
[ 27.124735] cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 27.355490] usb 1-2: firmware: requesting v4l-cx2341x-enc.fw
[ 27.656232] cx25840 4-0044: 0x0000 is not a valid video input!
[ 27.706604] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN
DVB-T)...
[ 27.740746] tda18271 4-0060: creating new instance
[ 27.741738] tda18271_read_regs: ERROR: i2c_transfer returned: -5
[ 27.741751] Unknown device detected @ 4-0060, device not supported.
[ 27.741982] tda18271_read_regs: ERROR: i2c_transfer returned: -5
[ 27.741993] Unknown device detected @ 4-0060, device not supported.
[ 27.742001] tda18271_attach: error -22 on line 1243
[ 27.742011] tda18271 4-0060: destroying instance
tomas at MythCube:~$
-------------------------------------------------------------------------------
My plan is to use it with MythTv, Ive set it up bot like a USB-device and
like a ITVT-device without success.
Entered my channels manually with MythWeb but only noise when changing
channel.
Tried using VLC, but cant figure out how to set frequency, "vlc /dev/video0"
just brings same noise.
The red lamp on the hvr-1900 lights up when Im trying to use it, so it looks
like everything works except changing channel, so thats why Im thinking that
the problem lies in pvrusb2-driver.
All helps are appreciated since I've been trying for a couple of weeks now
google around for info...
Thanks!
/Tomas
More information about the pvrusb2
mailing list