[pvrusb2] tda9887 0-0043: i2c i/o error: rc == -5 (should be 4)

[Martin Dauskardt]

Hi Mike,

first, thanks for fixing the bug with the wrong default values. It works now 
fine.

I am using a 2.6.29 with a current v4l-dvb hg.

This is was dmesg reports:

[17051.484813] pvrusb2: Attached sub-driver saa7115
[17051.500433] msp3400 0-0040: MSP3415G-B8 found @ 0x80 (pvrusb2_a)
[17051.500436] msp3400 0-0040: msp3400 supports nicam and radio, mode is 
autodetect and autoselect
[17051.500484] pvrusb2: Attached sub-driver msp3400
[17051.540421] tuner 0-0061: chip found @ 0xc2 (pvrusb2_a)
[17051.540425] pvrusb2: Attached sub-driver tuner
[17051.550529] tuner 0-0043: chip found @ 0x86 (pvrusb2_a)
[17051.550609] tda9887 0-0043: creating new instance
[17051.550611] tda9887 0-0043: tda988[5/6/7] found
[17051.551055] tda9887 0-0043: i2c i/o error: rc == -5 (should be 4)
[17051.551064] pvrusb2: Attached sub-driver tuner
[17051.574062] tveeprom 0-0050: Hauppauge model 29034, rev C547, serial# 
7203756
[17051.574066] tveeprom 0-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
[17051.574069] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
[17051.574071] tveeprom 0-0050: audio processor is MSP3415 (idx 6)
[17051.574073] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
[17051.574075] tveeprom 0-0050: has radio, has IR receiver, has no IR 
transmitter
[17051.574081] pvrusb2: Supported video standard(s) reported available in 
hardware: PAL-B/B1/G/H;SECAM-B/G/H
[17051.574086] pvrusb2: Mapping standards mask=0xd000f 
(PAL-B/B1/G/H;SECAM-B/G/H)
[17051.574088] pvrusb2: Setting up 9 unique standard(s)
[17051.574091] pvrusb2: Set up standard idx=0 name=PAL-B/G
[17051.574094] pvrusb2: Set up standard idx=1 name=SECAM-B/G
[17051.574096] pvrusb2: Set up standard idx=2 name=PAL-B
[17051.574099] pvrusb2: Set up standard idx=3 name=PAL-B1
[17051.574101] pvrusb2: Set up standard idx=4 name=PAL-G
[17051.574104] pvrusb2: Set up standard idx=5 name=PAL-H
[17051.574106] pvrusb2: Set up standard idx=6 name=SECAM-B
[17051.574109] pvrusb2: Set up standard idx=7 name=SECAM-G
[17051.574111] pvrusb2: Set up standard idx=8 name=SECAM-H
[17051.574115] pvrusb2: Initial video standard guessed as PAL-B/B1/G
[17051.574738] pvrusb2: Device initialization completed successfully.
[17051.574752] usb 2-2: firmware: requesting v4l-cx2341x-enc.fw
[17051.574951] pvrusb2: registered device video0 [mpeg]
[17051.583341] pvrusb2: registered device radio0 [mpeg]
[17051.885564] tuner-simple 0-0061: creating new instance
[17051.885569] tuner-simple 0-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
[17052.020058] tda9887 0-0043: i2c i/o error: rc == -5 (should be 4)


The tda 9887 errors appears every time I close and re-open the device.

Nevertheless, the device seems to work. Should I be worried?

Greets,

Martin