[pvrusb2] I2C warning latest snapshot and kernel 2.6.20.

[Bent Lykkebo]

I have just installed kernel version 2.6.20 with the latest snapshot on 
my Ubuntu laptop, but why do I get the I2C warning (the device seems to 
be working) and I still have the problem that the msp3400 chip reset 
sometime fails - not in this log.

[ 2548.580000] /home/../driver/pvrusb2-main.c: Hauppauge WinTV-PVR-USB2 
MPEG2 Encoder/Tuner : 20070127 (from www.isely.net)
[ 2548.580000] /home/../driver/pvrusb2-main.c: Debug mask is 15 (0xf)
[ 2548.720000] pvrusb2: Device microcontroller firmware (re)loaded; it 
should now reset and reconnect.
[ 2548.892000] usb 2-1: USB disconnect, address 3
[ 2550.644000] usb 2-1: new high speed USB device using ehci_hcd and 
address 4
[ 2550.776000] usb 2-1: configuration #1 chosen from 1 choice
[ 2550.888000] usb 2-1: reset high speed USB device using ehci_hcd and 
address 4
[ 2551.420000] **WARNING** I2C adapter driver [pvrusb2_a] forgot to 
specify physical device; fix it!
[ 2551.528000] msp3400 0-0040: MSP3415G-B8 found @ 0x80 (pvrusb2_a)
[ 2551.528000] msp3400 0-0040: MSP3415G-B8 supports nicam and radio, 
mode is autodetect and autoselect
[ 2551.592000] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 
(pvrusb2_a)
[ 2551.796000] tuner 0-0061: chip found @ 0xc2 (pvrusb2_a)
[ 2551.828000] tveeprom 0-0050: Hauppauge model 29034, rev C347, serial# 
6800105
[ 2551.828000] tveeprom 0-0050: tuner model is LG TP18PSB01D (idx 47, 
type 28)
[ 2551.828000] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 2551.828000] tveeprom 0-0050: audio processor is MSP3415 (idx 6)
[ 2551.828000] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
[ 2551.828000] tveeprom 0-0050: has radio, has IR receiver, has no IR 
transmitter
[ 2551.856000] tuner 0-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
[ 2551.988000] msp3400 0-0040: MSP3415G-B8 rev1 = 0x0207 rev2 = 0x0f48
[ 2551.988000] msp3400 0-0040: Audio:    volume 62000
[ 2551.988000] msp3400 0-0040: Audio:    balance 0 bass 0 treble 0 
loudness off
[ 2551.988000] msp3400 0-0040: Standard: autodetect start (mono)
[ 2551.988000] msp3400 0-0040: Audmode:  0x0001
[ 2551.988000] msp3400 0-0040: Routing:  0x00000000 (input) 0x00000044 
(output)
[ 2551.988000] msp3400 0-0040: ACB:      0x0c00
[ 2551.988000] saa7115 0-0021: Audio frequency: 48000 Hz
[ 2551.988000] saa7115 0-0021: Input:           Composite 4
[ 2551.988000] saa7115 0-0021: Video signal:    bad
[ 2551.988000] saa7115 0-0021: Frequency:       50 Hz
[ 2551.988000] saa7115 0-0021: Detected format: BW/No color
[ 2551.988000] saa7115 0-0021: Width, Height:   720, 576
[ 2551.988000] tuner 0-0061: Tuner mode:      analog TV
[ 2551.988000] tuner 0-0061: Frequency:       175.25 MHz
[ 2551.988000] tuner 0-0061: Standard:        0x00000005
[ 2551.988000] pvrusb2: Device initialization completed successfully.
[ 2551.988000] pvrusb2: registered device video0 [mpeg]
[ 2551.988000] pvrusb2: registered device radio0 [mpeg]

Thanks
Bent