[pvrusb2] IR Question?

[Ingo Flaschberger]

Hi miephos,


send the output from dmesg and lsmod.

bye,
 	ingo flaschberger

geschaeftsleitung
crossip communications gmbH
------------------------------
sebastian kneipp gasse 1
a-1020 wien
fix: +43-1-726 15 22-217
fax: +43-1-726 15 22-111
mob: +43-699-105 86 719
www.xip.at
------------------------------
On Tue, 24 Jan 2006, Miephos wrote:

> Hi Jeff,
> thanks for your hint. I did what you say.
>
> things that I did:
> PC-MIEPHOS: # modprobe lirc_i2c
> PC-MIEPHOS: # rclirc start
> Starting lircd (/dev/lirc)                                           done
>
> PC-MIEPHOS: # irrecord test.lirc
> ......
> Please send the finished config files to <lirc at bartelmus.de> so that I
> can make them available to others. Don't forget to put all information
> that you can get about the remote control in the header of the file.
>
> Press RETURN to continue.
>
>
> Hold down an arbitrary button.
> ..................................................irrecord: gap not found,
> can't continue
>
> I see the dots then I press a button, but what is wrong "gap not found"
> What must I do next??
>
> Thanks for your help. I hope, I will get to get the IR to work with your help.
>
> ~miephos
>
>
> Am Sonntag, 22. Januar 2006 18:24 schrieb Jeff Sadowski:
>> Ok it looks to me your all setup for lirc like I was
>> saying earlier lircs docs are f***d so hers my first
>> attempt :-P
>>
>> mknod /dev/lirc c 61 0
>>
>> then I keep a copy of the node in /etc/udev/devices/
>>
>> mknod /etc/udev/devices/lirc c 61 0
>>
>> so it is recreated on startup :-)
>>
>> ok now for making sure your remote is working
>>
>> irrecord test.lirc
>>
>> then follow the instructions
>>
>> if you see dots when you press the button you know its
>> working ;-)
>>
>> I'm still learning lirc but this will let you know its
>> working.
>> I'll be back with more later good luck.
> _______________________________________________
> pvrusb2 mailing list
> pvrusb2 at isely.net
> http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
>