[pvrusb2] firmware problems it seems

[Jeff Sadowski]

confirmed mplayer /dev/video shows a picture but no sound I'll look into sysfs
it could be why I have no sound

Mike Isely <isely at isely.net> wrote: On Sun, 9 Apr 2006, Jeff Sadowski wrote:

> Ok it got further heres what dmesg looks like now before I start xawtv
> look below for what happens when I start xawtv I tryed mplayer also

I think you just dug up a significant clue.  We are having problems with 
xawtv.  I'll use the info below to help track it down.

As for mplayer, _that_ should be working, but you can't run mplayer like 
it is talking to a V4L device.  Just feed /dev/video0 (or whatever) to 
mplayer as if it were a normal file (i.e. don't enable V4L) and it should 
work.  When running in this mode, you can still use sysfs to control the 
device.

I agree this is a less-than-optimal situation.  I've just been snowed 
under with driver related work in the past two weeks.  I am only now just 
starting to get dug out.  The translation of the bad ioctl()'s from xawtv 
is a really good clue.  I'll see what I can do with that.

   -Mike

-- 
                         |         Mike Isely          |     PGP fingerprint
      Spammers Die!!     |                             | 03 54 43 4D 75 E5 CC 92
                         |   isely @ pobox (dot) com   | 71 16 01 E2 B5 F5 C1 E8
                         |                             |
_______________________________________________
pvrusb2 mailing list
pvrusb2 at isely.net
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2


		
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates starting at 1&cent;/min.