[pvrusb2] Excellent! Success on Ubuntulinux

[Andreas Korinek]

On Saturday 15 October 2005 18:39, Mike Isely wrote:

> > Also I get an error message in the kernel log:
> >
> > [4403101.937000] tveeprom: Encountered bad packet header [c2]. Corrupt
> > or not a Hauppauge eeprom.
> >
> > ...but it doesn't seem to affect anything.
>
> This however seems somewhat alarming.  Is it repeatable?  Are you sure
> this is happening with the tveeprom.ko coming from the pvrusb2 driver?
> (Did you make sure you renamed the bad tveeprom.ko AND unloaded it?)


I have this message too, doesn't do any harm, the firmware is loaded 
afterwards


Linux video capture interface: v1.00
pvrusb2 pvr_init
pvrusb2 pvr2_hdw_create: hdw=ffff81003d503000
pvrusb2 Driver unit number is 0, name is pvrusb2_a
pvrusb2 subsys_stream_mask: 0x7800
pvrusb2 pvr_probe(pvr=ffff81003bc52140)
pvrusb2 pvr2_hdw_setup(hdw=ffff81003d503000) begin
pvrusb2 Performing a device reset...
usbcore: registered new driver pvrusb2
/home/andreas/downloads/pvrusb2-mci-20050921/driver/pvrusb2-main.c: Hauppauge 
WinTV-PVR-USB2 MPEG2 Encoder/Tuner : 0.8-mci (21-Sep-2005)
/home/andreas/downloads/pvrusb2-mci-20050921/driver/pvrusb2-main.c: Debug mask 
is 4214975 (0x4050bf)
usb 1-4: reset high speed USB device using ehci_hcd and address 4
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
pvrusb2 i2c_attach [client=Hauppauge IR @ 0x18 id=0xf3]
lirc_dev: lirc_register_plugin: sample_rate: 10
tveeprom: Encountered bad packet header [c2]. Corrupt or not a Hauppauge 
eeprom.
pvrusb2 i2c_attach [client=tveeprom[50] @ 0x50 id=0xf2]
tuner: chip found at addr 0xc2 i2c-bus pvrusb2_a
pvrusb2 i2c_attach [client=(tuner unset) @ 0x61 id=0x2]
pvrusb2 attaching tuner I2C client
msp34xx: ivtv version
msp34xx: init: chip=MSP3415G-B8, has NICAM support, simple (D) mode, simpler 
(G) no-thread mode
msp34xx: $Id: msp3400.c 550 2005-08-25 01:57:47Z isely $ compiled on: Sep 22 
2005 07:29:03
pvrusb2 i2c_attach [client=MSP3415G-B8 @ 0x40 id=0x1]
pvrusb2 attaching msp3400 I2C client
pvrusb2 i2c_attach [client=saa7115[50] @ 0x21 id=0xf1]
pvrusb2 attaching saa7115 I2C client
pvrusb2 pvr2_upload_firmware2
pvrusb2 Requesting uproc soft reset
pvrusb2 Requesting uproc hard reset
pvrusb2 upload of pvrusb2.f2 : 262144 / 262144
tveeprom: Hauppauge: model = 29039, rev = D157, serial# = 7708481
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 
= 0x00400e17)
tveeprom: audio processor = MSP3415 (type = 6)
tveeprom: decoder processor = SAA7115 (type = 13)
pvrusb2 eeprom results:
pvrusb2 has_radio=1
pvrusb2 tuner_type=38
pvrusb2 tuner_formats=0x400e17
pvrusb2 audio_processor=6
pvrusb2 model=19
pvrusb2 revision=29039
pvrusb2 serial_number=9508183
pvrusb2 rev_str=Au
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by pvrusb2_a
pvrusb2 Detected video standard SECAM-L (from eeprom)
pvrusb2 Detected video standard PAL-BG (from eeprom)
pvrusb2 Detected video standard PAL-I (from eeprom)
pvrusb2 Setting initial video standard to SECAM-L (detected from eeprom)
pvrusb2 /*--TRACE_COMMIT--*/ "Brightness" <-- 128 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Contrast" <-- 68 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Saturation" <-- 64 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Hue" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Volume" <-- 65535 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Balance" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Bass" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Treble" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Mute" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Sample rate" <-- 0 (48KHz)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Bitrate" <-- 3 (224kb/s)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio CRC" <-- 1 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Emphasis" <-- 0 (None)
pvrusb2 /*--TRACE_COMMIT--*/ "Variable video bitrate" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Average video bitrate" <-- 6000000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Peak video bitrate" <-- 6000000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Video Standard" <-- 1 (SECAM-L)
pvrusb2 /*--TRACE_COMMIT--*/ "Video Source" <-- 0 (television)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Mode" <-- 1 (Stereo)
pvrusb2 /*--TRACE_COMMIT--*/ "Tuner Frequency (Hz)" <-- 175250000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Horizontal capture resolution" <-- 720 
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Vertical capture resolution" <-- 480 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Interlace mode" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Layer" <-- 2 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Channel" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Channel Program ID" <-- 0 (<integer>)
pvrusb2 pvr2_stream_create: sp=ffff81003b134c00
pvrusb2 pvr2_hdw_setup: video stream is ffff81003b134c00
pvrusb2 pvr2_hdw_setup(hdw=ffff81003d503000) done, ok=1 init_ok=1
pvrusb2 Device initialization completed successfully.
pvrusb2 Registered pvrusb2 v4l device, minor=0
pvrusb2 pvr2_v4l2_do_ioctl failure, ret=-22 (0xffffffea)

-- 
Mit freundlichen Grüßen / With kind regards,
Andreas Korinek, B. SC.

Top scientists agree that with the present rate of consumption, the earth's
supply of gravity will be exhausted before the 24th century. As man
struggles to discover cheaper alternatives, we need your help. Please...

			CONSERVE GRAVITY

Follow these simple suggestions:

(1)  Walk with a light step.  Carry helium balloons if possible.
(2)  Use tape, magnets, or glue instead of paperweights.
(3)  Give up skiing and skydiving for more horizontal sports like curling.
(4)  Avoid showers .. take baths instead.
(5)  Don't hang all your clothes in the closet ... Keep them in one big pile.
(6)  Stop flipping pancakes