[pvrusb2] Compile issue

Fri Dec 9 01:40:35 CST 2005

OK, FINALLY!!!  I got it to work, me thinks.

I used the 20051126 snapshot, but did NOT use the ivtv drivers (tveeprom,
tuner and msp3400) that came with it.  I instead used the drivers that came
with the stock kernel.  Then, everything worked like a charm with hotplug
recognizing the device.  So, the problem seems to be the ivtv drivers in the
pvrusb snapshot, or at least my usage/installation of them.  Of course, the
saa7115 driver still comes from pvrusb2/ivtv, since it does not exist in the
stock kernel.

Mike, could you quickly look over the dmesg output below and let me know if
it looks OK?  I very much appreciate your assistance.

pvrusb2 pvr_init
pvrusb2 pvr2_hdw_create: hdw=f4e60000
pvrusb2 Driver unit number is 0, name is pvrusb2_a
pvrusb2 subsys_stream_mask: 0x7800
pvrusb2 pvr_probe(pvr=f6d7db40)
pvrusb2 pvr2_hdw_setup(hdw=f4e60000) begin
pvrusb2 pvr2_upload_firmware1
usbcore: registered new driver pvrusb2
/home/mythtv/pvrusb2-mci-20051126/driver/pvrusb2-main.c: Hauppauge
WinTV-PVR-USB2 MPEG2 Encoder/Tuner : 20051126 (from www.isely.net)
/home/mythtv/pvrusb2-mci-20051126/driver/pvrusb2-main.c: Debug mask is
4214975 (0x4050bf)
pvrusb2 cpureset_assert(1)
pvrusb2 Upload done, releasing device's CPU
pvrusb2 cpureset_assert(0)
pvrusb2 Upload done (8192 bytes sent)
pvrusb2 pvr2_hdw_setup(hdw=f4e60000) done, ok=1 init_ok=0
pvrusb2 Device firmware (re)load executed; it should now reset and
reconnect.
pvrusb2 pvr_disconnect(pvr=f6d7db40) BEGIN
pvrusb2 pvr2_hdw_disconnect(hdw=f4e60000)
pvrusb2 pvr2_hdw_remove_usb_stuff: hdw=f4e60000
pvrusb2 render_useless
pvrusb2 pvr2_hdw_destroy: hdw=f4e60000
pvrusb2 pvr_disconnect(pvr=f6d7db40) DONE
pvrusb2 pvr2_hdw_create: hdw=f707a000
pvrusb2 Driver unit number is 0, name is pvrusb2_a
pvrusb2 subsys_stream_mask: 0x7800
pvrusb2 pvr_probe(pvr=f73dde40)
pvrusb2 pvr2_hdw_setup(hdw=f707a000) begin
pvrusb2 Performing a device reset...
saa7115 1-0021: saa7115 found @ 0x42 (pvrusb2_a)
pvrusb2 i2c_attach [client=saa7115 @ 0x21 id=0xf1]
pvrusb2 attaching saa7115 I2C client
pvrusb2 i2c_attach [client=tveeprom @ 0x50 id=0xf2]
pvrusb2 attaching tveeprom I2C client
tuner 1-0061: chip found @ 0xc2 (pvrusb2_a)
pvrusb2 i2c_attach [client=(tuner unset) @ 0x61 id=0x2]
pvrusb2 attaching tuner I2C client
pvrusb2 i2c_attach [client=MSP3415G-B8 @ 0x40 id=0x1]
pvrusb2 attaching msp3400 I2C client
pvrusb2 pvr2_upload_firmware2
pvrusb2 Requesting uproc soft reset
pvrusb2 Requesting uproc hard reset
pvrusb2 upload of pvrusb2.f2 : 262144 / 262144
pvrusb2 Using ivtv video decoder driver
pvrusb2 eeprom detected v4l tveeprom module
pvrusb2 eeprom direct call results:
pvrusb2 has_radio=1
pvrusb2 tuner_type=38
pvrusb2 tuner_formats=0x400e17
pvrusb2 audio_processor=6
pvrusb2 model=29039
pvrusb2 revision=9508240
pvrusb2 serial_number=8039721
pvrusb2 rev_str=D160
pvrusb2 Detected video standard SECAM-L (from eeprom)
pvrusb2 Detected video standard PAL-BG (from eeprom)
pvrusb2 Detected video standard PAL-I (from eeprom)
pvrusb2 Setting initial video standard to SECAM-L (detected from eeprom)
pvrusb2 /*--TRACE_COMMIT--*/ "Brightness" <-- 128 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Contrast" <-- 68 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Saturation" <-- 64 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Hue" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Volume" <-- 65535 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Balance" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Bass" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Treble" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Mute" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Sample rate" <-- 0 (48KHz)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Bitrate" <-- 3 (224kb/s)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio CRC" <-- 1 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Emphasis" <-- 0 (None)
pvrusb2 /*--TRACE_COMMIT--*/ "Variable video bitrate" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Average video bitrate" <-- 6000000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Peak video bitrate" <-- 6000000 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Video Standard" <-- 1 (SECAM-L)
pvrusb2 /*--TRACE_COMMIT--*/ "Video Source" <-- 0 (television)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Mode" <-- 1 (Stereo)
pvrusb2 /*--TRACE_COMMIT--*/ "Tuner Frequency (Hz)" <-- 175250000
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Horizontal capture resolution" <-- 720
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Vertical capture resolution" <-- 480
(<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Interlace mode" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Audio Layer" <-- 2 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Channel" <-- 0 (<integer>)
pvrusb2 /*--TRACE_COMMIT--*/ "Channel Program ID" <-- 0 (<integer>)
pvrusb2 pvr2_stream_create: sp=f6d7d3c0
pvrusb2 pvr2_hdw_setup: video stream is f6d7d3c0
pvrusb2 pvr2_hdw_setup(hdw=f707a000) done, ok=1 init_ok=1
pvrusb2 Device initialization completed successfully.
pvrusb2 Registered pvrusb2 v4l device, minor=0

On 12/9/05, cardboil <cardboil at gmail.com> wrote:
>
> I uninstalled the video4linux and ivtv rpms I had installed.  I downloaded
> the 20051126 snapshot of the pvrusb driver.  I compiled the pvrusb2 driver
> and the ivtv drivers per the pvrusb2 instructions.  But, I still get the
> same errors:
>
> [root at 192 mythtv]# dmesg|grep -i pvrusb2
> pvrusb2: disagrees about version of symbol tveeprom_hauppauge_analog
> pvrusb2: Unknown symbol tveeprom_hauppauge_analog
> [root at 192 mythtv]# modprobe pvrusb2
> FATAL: Error inserting pvrusb2 (/lib/modules/2.6.14-
> 1.1644_FC4/kernel/drivers/pvrusb2/pvrusb2.ko): Unknown symbol in module,
> or unknown parameter (see dmesg)
>
> ???
>
>
> On 12/9/05, Mike Isely <isely at isely.net> wrote:
> >
> > On Fri, 9 Dec 2005, cardboil wrote:
> >
> > > Would it be easier if I uninstalled the video4linux rpms I installed
> > and
> > > went back to the stock kernel drivers?  If so, would rpm -e
> > > video4linux...rpm suffice?  Thanks much.
> >
> > Yeah, it probably would be easier...
> >
> > You should not need that update to use this driver.  (Of course, now
> > having said that you'll probably hit some new wierd problem...)
> >
> >    -Mike
> >
> > --
> >                          |         Mike Isely          |     PGP
> > fingerprint
> >       Spammers Die!!     |                             | 03 54 43 4D 75
> > E5 CC 92
> >                          |   isely @ pobox (dot) com   | 71 16 01 E2 B5
> > F5 C1 E8
> >                          |                             |
> > _______________________________________________
> > pvrusb2 mailing list
> > pvrusb2 at isely.net
> > http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
> >
>
>